Extron-electronics FOX DA8 Plus User Guide Instrukcja Użytkownika Pobierz pdf (Strona 11)

a AC power connector — Plug a standard IEC power cord into this connector to connect

the FOX DA8 Plus to a 100 VAC to 240 VAC, 50-60 Hz power source.

b Input connectors and LEDs —

OPTICAL

1 2*

OPTIONAL FOR

RETURN DATA

LINK

Transmitter

Receiver

OPTICAL

2* 1

LINK

OUT IN

NOTE: Input LC connectors (on the right) marked with an

asterisk (*) in figure 2 are functional only when selected as

an input using the DA configuration switch (item d). The

right-hand connector for transceiver blocks 2, 4, 6, and 8

can never be functional.

Optical transceiver Input connector — For one-way video, audio,

and serial communications from the transmitter to the FOX DA8 Plus for

distribution to the receivers, connect a fiber cable to the optical

transceiver input LC connector on transceiver block 1 ( the LC connector

on the right).

Connect the far end of this fiber optic cable to the sending connector on

the transmitter or another compatible Extron device.

Optical transceiver block 1 Input LED — When this LED is lit, the link

is active (light is received from the transmitter).

NOTE: The LEDs on the right for transceiver blocks 2, 4, 6, and 8

may light, but do not indicate that there is an input to that

connector.

c Output connectors and LEDs —

Connectors — For one-way video, audio, and serial communications

from the FOX DA8 Plus to the receivers, connect up to eight fiber optic

cables to the output LC connectors on transceiver blocks 1 through 8.

Connect the far ends of these fiber optic cables to the receiving

connectors on the receivers or other compatible Extron devices.

LEDs — These LEDs are always lit, whether the output is active

(unmuted) or not.

d DA configuration switch — Set this switch to configure the unit in

any of the following configurations (see “Configuration“on page 8).

• One 8-output DA

(1)1x8

(2)1x4

(4)1x2

• Two 4-output DAs

• Four 2-output DAs

FOX DA8 Plus • Installation and Operation 5

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 28 29

Komentarze do niniejszej Instrukcji

Brak uwag

Extron-electronics FOX DA8 Plus User Guide Instrukcja Użytkownika Strona 11

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Akcesoria do wideo Extron-electronics FOX DA8 Plus User Guide