Extron-electronics MLC 226 IP Series Installation Instrukcja Użytkownika Pobierz pdf (Strona 52)

Software-based Conﬁ guration and Control, cont’d

MLC 226 IP Series • Software-based Conﬁ guration and Control

4-8

PRELIMINARY

2. Right-click on Local Area Connection, then select Properties.

3. Select Internet Protocol (TCP/IP)

and click on the Properties button.

If Internet Protocol (TCP/IP) is not

on the list, it must be added

(installed). Refer to the Windows

user’s manual or the Windows

online help system for information

on how to install the TCP/IP

protocol.

4. Write down the PC’s current IP

address and subnet mask below.

If your PC is set to “Obtain an IP

address automatically,” make a note

of that, instead. You will need to

restore these settings to the PC later.

IP address:

. . . .

Subnet mask:

. . . .

5. Change the PC’s IP address so it can communicate with the MLC 226 IP and

change the controller’s IP settings.

a. Select the “Use the following IP address:” radio button.

b. Enter the following values, as shown in the following picture:

IP address: 192.168.254.253

Subnet mask: 255.255.0.0

Default gateway: blank or 0.0.0.0

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 163 164

Brak uwag

Extron-electronics MLC 226 IP Series Installation Instrukcja Użytkownika Strona 52