Extron electronics SW12 VGA Ars Instrukcje Operacyjne Pobierz pdf (Strona 13)

Installation and Operation, cont’d

SW8/12 VGA Ars • Installation and Operation

2-4

Mounting under a desktop

Under-deskmountingrequirestheoptionalMBU1491U,under-deskmountingkit

(part #70-222-01).

MountanSW8/12VGAArsunderadesktopasfollows:

1. Installthemountingbracketsontheunit’ssideswiththeeightmachine

screws provided in the kit.

. Holdtheunit(withbracketsattached)againsttheunderside of the desk.

Markeachbracket'sholelocationontheundersideofthedesk.

3. Drill1/4"(6.4mm)deep,3/32"(2mm)diameterpilotholesfromthe

underside of the desk at the marked hole locations.

. Insertthefourwoodscrewsintothepilotholesandtightenuntil

approximately1/4"(6.4mm)ofthescrew'sheadisprotruding.

5. Installthemountingbrackets,withtheunitattached,overtheprotruding

screw heads.

. Slide the unit slightly to lock it in place.

7. Tighten all four screws to secure it in place.

#8 Screw

(4 Plcs)

Each Side

Optional Furniture Mountin

g Bracket

Mounting Screws

(2 Plcs)

Each Side

Figure 2-2 — Mounting the switcher under a desktop

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 40 41

Brak uwag

Extron electronics SW12 VGA Ars Instrukcje Operacyjne Strona 13