Extron-electronics Annotator User Guide Instrukcja Użytkownika Strona 78

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 108
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 77
I/O Conguration Tab
The I/O Configuration tab allows input and output conguration, as well as EDID
emulation settings to be adjusted.
Figure 38. The I/O Configuration Tab Screen
Input Config — Set a suitable video type for an input by clicking on the drop-down
box (see input 7 above) and selecting a listed video type.
If Auto Image on an input is desired mark the check box.
Check Film Mode if 3:2 pull down detection for NTSC and 2:2 film detection for PAL
video sources is relevant.
Output Config — To configure an output resolution, refresh rate, output type, or
sync polarity, select the desired values from the respective drop-down list.
EDID Emulation — To set resolution and refresh rates for EDID emulation on the
VGA/DVI inputs, select the values from the drop-down list. Alternatively select Match
Output to automatically set the EDID to match the output resolution and refresh
rate.
Annotator • SPPCP 72
Przeglądanie stron 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 107 108

Komentarze do niniejszej Instrukcji

Brak uwag